Step 3: Connect & Tighten

Next, secure the cords high up and around the pipe with a zip tie and plug the pump into a standard household 15-amp outlet. The circuit should be dedicated to the sump pump exclusively, and remember not to handle the pump while it is plugged in, whether it is running or not.

Finally, you can check the pumps operation by filling the sump pit with water until the pump starts. Let it run until it has pumped down the sump and stopped. Once you are satisfied that the pump is operating properly, replace the sump pit cover - congratulations, mere minutes have passed by and you have successfully installed your Easy Sump Sump Pump!